background image

Midtronics Inc.     7000 Monroe Street     Willowbrook, IL 60527

www.midtronics.com

7

Chapter 1: Introduction & Overview

EXP-1003 HD

Display And Keypad

The analyzer keypad and display work together to help you 

quickly find and use the right tools at the right time. The 

display also keeps you on track with on-screen navigation aids, 

directions, and messages. The illustration below shows how 

the elements on the screen relate to the keypad.

  Internal Batteries Status Indicator

This indicator appears in the screen’s top left corner, lets 

you know the status and charge level of the analyzer’s six 

(6) 1.5-volt batteries. The “X” in the top left corner of the 

screen shows that the analyzer is powered by the battery 

you’re testing to conserve the analyzer’s internal batteries.

  Voltmeter

When you first connect the analyzer to a battery it 

functions as a voltmeter. The voltage reading appears 

above the left soft key until you move to other menus or 

functions.

  Soft Keys

Press the two soft keys linked to the bottom of the screen 

to perform the functions displayed above them. The 

functions change depending on the menu or test process. 

So it may be helpful to think of the words appearing above 

them as part of the keys. Some of the more common soft-

key functions are SELECT, BACK, and END.

  POWER Key

Press the POWER button to turn the analyzer on and 

off. The analyzer also turns on automatically when you 

connect its test leads to a battery.

  Title Bar

The title bar shows you the name of the current menu, test 

tool, utility, or function.

  Selection Area

The selection area below the Title Bar contains selectable 

items or dialog boxes that display information or require 

a response.

  Menu Screen Arrows

When displayed in menu screens, the menu screen arrows 

show you which ARROW key on the keypad to press to 

display other icons or screens. When displayed under a list 

of options, the menu screen arrows show you which keypad 

arrow to press to highlight a character or item in a list.

  Scroll Bar

Another navigational aid is the scroll bar on the right side 

of the screen. The position of its scroll box shows you 

whether the screen is the top (or only screen), middle, or 

last in a series.

Top or 

only 

screen

Middle 

screen

Last 

screen

Scroll 

Box

  Arrow (

 

 

 

Keys

Press 

 to move up to the next selectable item or row. 

When entering text, use 

 to move to the previous 

character.
Press 

 to move down to the next selectable item or row. 

When entering text, use 

 to move to the next available 

character.
Use 

 or 

 to scroll to the letters A through Z and the 

numbers 0 through 9.  When entering text, use 

 to move 

one space to the right and 

 to move one space to the left.

  Alphanumeric Keypad

In some cases, you can use the Alphanumeric Keypad to 

enter numerical test parameters instead of scrolling to 

them with the 



 



 keys.

You can also use the Alphanumeric Keys to create and edit 

customer coupons. The keypad includes characters for 

punctuation.
To add a space, press 

. To add a space or insert a 

character, press 

.

Содержание EXP-1003 HD

































Отзывы: