Midtronics EXP-1003 HD, Инструкция по эксплуатации

Страница: 17 / 32

Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527 www.midtronics.com
17
Chapter 3: System Test EXP-1003 HD
Truck Test Results
The tester displays the complete results on multiple screens.
To view the code, press  or  . The tester will generate a test
code for all REPLACE decisions.
To send the results to the IR printer, align the analyzer’s IR
transmitter with the printer’s receiver, and press PRINT. To
return to the Main Menu, press END.
NOTE: For REPLACE or BAD CELL decisions, enter the
battery serial number located on the battery case to
generate a test code for warranty purposes. When
finished, press NEXT to continue.
Pack
Decision
Selected
rating
Battery
temperature
Batteries
In Pack
Vehicle ID
Results:
Battery 1
Results:
Battery 2
Truck Test Decisions
Decision Recommended Action
GOOD
BATTERY
Return the battery to service.
GOOD–
RECHARGE
Fully charge the battery and return it to
service.
CHARGE &
RETEST
Fully charge the battery and retest. Failure
to fully charge the battery before retesting
may cause false readings. If CHARGE &
RETEST appears again, replace the battery.
REPLACE
BATTERY
May also mean a poor connection between
the battery and the vehicle.
BAD CELL–
REPLACE
This decision indicates a bad cell within the
battery. Replace the battery.
Risk of explosive gases.
Can cause death or
serious personal injury.
Never attempt to charge a
battery with a bad cell. The
battery must be replaced.
Battery Pack Test Results
The tester displays the complete results on multiple screens.
Press  or  to view each screen.
To send the results to the IR printer, align the analyzer’s IR
transmitter with the printer’s receiver, and press PRINT. To
continue with the System Test, press NEXT.
Battery Pack Decisions
Decision Recommended Action
GOOD PACK Return the battery pack to service.
CHECK
BATTERY
PACK
Break the battery pack apart and test each
battery individually.
24-VOLT
PACK
The system being tested in-vehicle is a 24-volt
system. Disconnect the batteries and test
them individually.