background image

Midtronics Inc.     7000 Monroe Street     Willowbrook, IL 60527

www.midtronics.com

28

Chapter 5: History

DSS-7000 

The History function allows access to the tool usage history, a 

vehicle history based on VIN, and user histories.
To access the History function, tap History on the Menu Bar at 

the top of the Tablet Control screen.

Home

Messages (1) History Support

Tool History

Tap on Tool History in the menu bar at the bottom of the Tablet 

Controller screen to display the tool usage totals.

Vehicle History User History

Tool History

Use Tool History to view test total history as well as in vehicle 

and out of vehicle test totals.  Individual test results are also 

displayed.

The tool testing history is displayed in a series of screens on 

the left side of the Tablet Controller.  Tap   or   to scroll to 

between screens.
Tap on the records displayed on the right side of the screen to 

view the individual test results.

Totals By Test Results

The totals are displayed by possible results for all battery 

chemistries and potential test results.

GOOD BATTERY

BC OPEN OR LOAD FAIL 

REPLACE

GOOD RECHARGE

BROKEN WELD REPLACE

MARGINAL RECHARGE

FROZEN BATTERY

MARGINAL

TOO HOT REPLACE

CHARGE & RETEST

TEMP SENSOR FAILED

REPLACE BATTERY

ABORTED

BADCELL SHORT REPLACE INVALID TEST
REMOTE POST

ABORTED/24V

SIDE POST

OUT OF BALANCE

Totals By Test Type

Displays test totals by test type.

Stock Management

Presale

Battery Replacement

Battery Carry In Return

Preventative Maintenance

Battery Return Vehicle

Totals By Time Interval

Displays test totals by time interval.  Also displays the number 

of tests performed in and out of vehicle.

Last 7 Days

In Vehicle

Last 30 Days

Out Vehicle

Last 90 Days

Vehicle History

Tap on Vehicle History in the menu bar at the bottom of the 

Tablet Controller screen to display the tool usage totals.

Tool History

User History

Vehicle History

Vehicle History displays test totals conducted on specific 

vehicles based on the VIN.  It is also possible to enter a VIN 

to search for test records for a specific vehicle by tapping the 

displayed buttons.

Scan VIN From Bar Code

: Use the camera built into the Tablet 

Controller to capture a VIN barcode, usually located on the 

driver’s side door frame.

Manually Type VIN Number

: Use the on-screen keypad to type 

the VIN manually.
Tap on the records displayed on the right side of the screen to 

view the individual test results.

User History

Tap on User History in the menu bar at the bottom of the 

Tablet Controller screen to display the tool usage totals.

Tool History Vehicle History User History

User History displays test totals for the user that is currently 

logged in to the analyzer.  The possible test results are the 

same as used in Test History.
Tap on the records displayed on the right side of the screen to 

view the individual test results.

Chapter 5: History

Содержание DSS-7000


































Отзывы: