Midtronics DSS-7000, Инструкция по эксплуатации

Страница: 11 / 33

Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527 www.midtronics.com
11
Chapter 2: Functions DSS-7000
Access all Functions by tapping on FUNCTIONS in the lower
right corner of the screen. The options under FUNCTIONS are
a series standardized battery tests and functions.
Functions Home Screen
Battery Test
Use the Battery Test function to select the test parameters and
interpret the results when testing an out-of-vehicle battery.
1. Tap Battery Test.
2. Connect the test clamps to the battery and tap Continue.
3. Hold the Diagnostic Device over the battery and tap Cap-
ture Temperature. Once the battery temperature has
been successfully measured, tap Continue.
4. Enter the battery testing parameters. Tap Continue when
finished.
Battery Post
TOP POST

SIDE POST

DUAL POST

Battery Application
AUTOMOTIVE

MARINE BATTERY

POWERSPORT

GROUP 31

COMMERCIAL 4D/8D

LAWN & GARDEN

Battery Type
FLOODED

AGM

AGM/SPIRAL

GEL

Battery Rating Units
CCA

CA

JIS

DIN(A)

SAE(A)

IEC(A)

EN(A)

EN2(A)

This information is usually printed on the battery label.
Rating Description Range
CCA Cold Cranking Amps: Battery
current at 0 ºF (–17.8 ºC).
100 to 3000
CA Cranking Amps: Battery current
at 32°F (0 ºC).
100 to 3000
JIS Japanese Industrial Standard:
Usually printed on battery label.
26A17 to
245H52
DIN(A) D eutsche I ndustrie- N orm 100 to 1000
SAE(A) European labeling of CCA 100 to 3000
IEC(A) I nternational E lectrotechnical
C ommission
100 to 1000
EN(A) E uropa- N orm 100 to 1700
EN2(A) E uropa- N orm 100 to 1700
Battery Rating ?
Tap on the box and use the keypad displayed on the
Tablet Controller to enter the battery rating.
NOTE: When JIS is selected, use the drop-down
menu to scroll to the correct JIS number.
Chapter 2: Functions