Midtronics DSS-7000, Инструкция по эксплуатации

Страница: 25 / 33

Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527 www.midtronics.com
25
Chapter 3: Applications (Apps) DSS-7000
This information is usually printed on the battery label.
Rating Description Range
CCA Cold Cranking Amps: Battery
current at 0 ºF (–17.8 ºC).
100 to 3000
CA
Cranking Amps: Battery current
at 32°F (0 ºC).
100 to 3000
JIS Japanese Industrial Standard:
Usually printed on battery label.
26A17 to
245H52
DIN(A) D eutsche I ndustrie- N orm 100 to 1000
SAE(A) European labeling of CCA 100 to 3000
IEC(A) I nternational E lectrotechnical
C ommission
100 to 1000
EN(A) E uropa- N orm 100 to 1700
EN2(A) E uropa- N orm 100 to 1700
Battery Rating ?
Tap on the box and use the keypad displayed on the
Tablet Controller to enter the battery rating.
NOTE: When JIS is selected, use the drop-down
menu to scroll to the correct JIS number.
Battery Test Results
After the test the tester displays one of five battery decisions
along with the complete results.
Tap PRINT to print the test results or EMAIL to email the
results to the customer. To return to the Home Screen, tap
DONE.
Decision Recommended Action
GOOD BATTERY Return the battery to service.
GOOD–
RECHARGE
Fully charge battery and return to
service.
CHARGE &
RETEST
Fully charge the battery and retest.
Failure to fully charge the battery
before retesting may cause false
readings. For a repeated CHARGE &
RETEST decision, replace battery.
REPLACE
BATTERY *
May also mean a poor connection
between battery cables and battery.
After disconnecting battery cables,
retest battery using Battery Test before
replacing.
BAD CELL–
REPLACE
Replace the battery and retest.
Pre Sale
Use the Pre Sale function to test each new battery before
customer purchase to confirm it is good and prevent potential
customer service or warranty issues.
1. Tap Pre Sale icon.
2. Connect the test clamps to the battery and tap Continue.
3. Hold the Diagnostic Device over the battery and tap Cap-
ture Temperature. Once the battery temperature has
been successfully measured, tap Continue.
4. Enter the battery testing parameters. Tap Continue when
finished.
Battery Post
TOP POST

SIDE POST

DUAL POST

Battery Application
AUTOMOTIVE

MARINE BATTERY

POWERSPORT

GROUP 31

COMMERCIAL 4D/8D

LAWN & GARDEN

Battery Type
FLOODED

AGM

AGM/SPIRAL

GEL
