Midstream Modus S 1100, Руководство по установке

Страница: 7 / 11

Driver
INPUT
cable
Driver
OUTPUT
cable
Driver INPUT cable
(to driver)
Output cable
(to floodlight)
Driver OUTPUT
cable
(from driver)
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
51
60
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
Driver INPUT cable
(to driver)
Output cable
(to floodlight)
Driver OUTPUT
cable
(from driver)
Mains
input
cable
Remove the cable sheath for a length of 60 mm, expose
the conductor for 9 mm and insert the mains cable
through the cable gland without the adapter. Connect
the YELLOW-GREEN wire to the 5-way WAGO terminal.
Close the void position as well, even if there is no wire
connected. Connect the BROWN wire to the 2-way
WAGO terminal that has already a brown wire with an
“L” sticker. Connect the BLUE wire to the 2-way WAGO
terminal that has already a blue wire with an “N” sticker.
Tighten the M20 cable glands (torque: 8 Nm).
midstreamlighting.com call +44 (0) 207 584 8310
12 13
MODUS S INSTALLATION GUIDANCE
6a. Floodlight connection - Outdoor driver 6b. Power supply connection - Outdoor driver
Connecting the WAGO terminals
Connect the YELLOW-GREEN wire to the 5-way WAGO terminal.
Connect the BROWN wire to the WAGO terminal that has already a brown wire with a “+” sticker. Connect the BLUE
wire to the WAGO terminal that has already a blue wire with a “-” sticker.