4 of 39
10-527-1 MN3024DIY REV A
MN3024DIY
User Manual
4
1. General information
1.1 Product overview and features
- -
DIY series is a new all-in-one hybrid solar charger/ inverter, which integrates battery MPPT
solar & AC input charging with sine wave output. Thanks to DSP control and advanced control
algorithm, it has fast response speed, high reliability and high industrial standards.
Four charging modes are available, i.e. Only Solar, Mains Priority, Solar Priority and Mains &
Solar hybrid charging; and two output modes are available, i.e. Inverter and Mains, to meet
different application requirements.
The solar charging module applies the latest optimized MPPT technology to quickly track the
maximum power point of the PV array in any environment and obtain the maximum energy of
the solar panel in real time.
Through a state of the art control algorithm, the AC-DC charging module realizes fully digital
voltage and current double closed loop control, with high control precision in a small volume. Wide
AC voltage input range and complete input/output protections are designed for stable and
reliable battery charging and protection.
Based on full-digital intelligent design, the DC-AC inverter module employs advanced SPWM
technology and outputs pure sine wave to convert DC into AC. It is ideal for AC loads
such as household appliances, power tools, industrial equipment, and electronic audio and
video equipment. The product comes with a segment LCD display design which allows real-time
display of the operating data and status of the system. Comprehensive electronic protections
keep the entire system safer and more stable.
Features:
1.
Full digital voltage and current double closed loop control, advanced SPWM technology,
pure sine wave output.
2.
Two output modes: mains bypass and inverter output; uninterrupted power supply.
3.
Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains &
Solar hybrid charging.
4.
Advanced MPPT technology with an efficiency of 99%.
5.
Designed with a LCD screen and 3 LED indicators for dynamic display of system
data and operating status.
6.
ON/OFF rocker switch for AC output control.
7.
Power saving mode available to reduce no-load loss.
8.
Intelligent variable speed fan to efficiently dissipate heat and extend system life.
9.
Battery charging using PV solar or AC input, supporting use of lead-acid and lithium
battery technologies.
10.
360 ° all-round protection with a number of protection functions.
11.
Complete protections, including short circuit protection, over voltage and under
voltage protection, overload protection, reverse protection, etc.