Midland BTNEXT PRO, Инструкция по эксплуатации

Страница: 4 / 21

UK
22 www.midlandeurope.com
bike-to-bike communications
Wire connections:
› For stereo audio input like iPod/MP3 player (with optional cable)
Attention: Midland BTNEXT PRO is designed to withstand rain and water. However, if it is
raining, always verify that the rubber cap protecting the recharging sockets is fully fitted.
Charging batteries
Attention: Make sure that the unit is fully charged before use. Allow at least 3 hours for a
full charge before using the unit for the first time.
Charge the unit by inserting the wall-charger into the charging socket (lift the rubber
cover to insert the plug). The red LED on the unit will start flashing when charging begins.
Allow the headset to charge until the unit stops flashing and the blue LED turns on.
When the charge is complete (the red LED is not flashing), release the headset from the
charger. Normally, after the first time, it takes 2 hours for a full charge.
Attention: every time the micro USB recharging plug is inserted (or detached), the device
is automatically turned off. To use it while it is in charge, you should turn the device on with
the plug already inserted.
Unit and fixing system description
BTNEXT PRO description
The BTNEXT PRO has five buttons on the front; the main three big button are multi
functions buttons: the Forward (on the left), the middle button and the Backward (on
the right), the two squared buttons are the and Volume -.
Middle
Volume -
Forward Backward
Description of the wired connections
On the bottom of the unit you can find the Charger jack that enables to recharge the
unit using a standard microUSB power supply
The same micro USB charger plug can be used to connect an audio source, like a stereo
iPod/MP3 player;
Attention: you need an optional AUX cable not included in the box.
Description of the audio kit
The audio system includes two ultra-flat stereo speakers and two interchangeable micro-
phones, which are both supplied with a bracket and wired connection. The mini connector
on the microphone allows you to choose the microphone that best suits the helmet you
are using.
Fixing the stereo speakers
The two stereo speakers have a Velcro/adhesive strip that aids their fixing into your hel-
met. Beware not to keep the volume too high, you must always be able to listen to the
traffic sound.
Charger plug