How to re-map the MIDI channel:
1. Hold down and press the PANIC button minimum 5 Seconds
while plugging the MIDI In to power the system. The LED
flashes, to show that you are now in "setup mode" .
2. Set switch 1 to ON, all MIDI message should modify the
channel as preset channel.
if switch 1 is OFF, don't modify channel
3. Press keyboard, the key MIDDLE C4 is channel 1, next key
C#4 – channel 2.. and so on.
C4 – channel 1
C#4 – channel 2
D4 - channel 3
D#4 – channel 4
E4 – channel 5
F4 – channel 6
F#4 – channel 7
G4 – channel 8
G#4 – channel 9
H4 – channel 10
C5 – channel 11
C#5 – channel 12
D5 – channel 13
D#5 – channel 14
E5 – channel 15
F5 – channel 16
4. To confirm the changed setup, press the Panic button a short
21
