5 = pan
6 = damper pedal
7 = portamento pedal
8 = sostenuto pedal
9 = soft pedal
10 = sound controller( variation, timbre, release time, attach
time, brightness)
11 = effect (chorus, reverb type, depth)
12 = reset (turn off all note, sound, reset all controller)
4. To confirm the changed setup, press the Panic button a short
time again. After this the box starts again with the work mode.
Note: with the PC editor software, you can specify to filter any
combination of them by check the items.
How to select filter pitch bend or after touch:
1.Hold down and press the PANIC button minimum 5 Seconds
while plugging the MIDI In to power the system. The LED
flashes, to show that you are now in "setup mode" .
2. Set switch 6 to ON
3. Press keyboard, a white key is for filter Pitch Bend, a black
key is for filter Aftertouch, if you press both white and black
keys, filter both.
4. To confirm the changed setup, press the Panic button a short
time again. After this the box starts again with the work mode.
24
