midiplus X III Series, Руководство пользователя

Страница: 6 / 28

5
X III Series User Manual
2.2 X Knob
The X knob has two working mode, power on defaults to normal mode, press it about 0.5 seconds to
switch to setting mode, the relevant parameter options of the keyboard can be set in this mode, for
more detailes, please refer to
3. Setting Mode .
Normal Mode: Turn the X knob to send Program Change(default) or CC7 message, this option can be
changed by Setting Mode.
Setting Mode: Turn the X knob to select options, press to confirm, press about 0.5 seconds to exit the
setting mode.
2.3 Transpose and Octave
Pressing the ◀ or ▶ button to shift the octave range of keyboard, when activated, the selected octave
button will light up, pressing the ◀ and ▶ buttons simultaneously will quickly reset the octave shift.
Press and hold the TRANS button, then pressing the ◀ or ▶ button to transpose, when activated, the
TRANS button will light up, and this can be toggled on and off by pressing the TRANS button, when off,
the TRANS button backlit will dimmer, the previously used transpose setting will be stored while the unit
remains powered.
2.4 Pitch and Modulation
Two capacitive touch strips allow for real-time pitch bend and modulation control. The LED light strips will
reflect the current status of each controller.
Sliding up or down on the Pitch touch strip will raise or lower the pitch of the selected tone. The range of
this effect is set within the hardware or software instrument being controlled.