OPERATING INSTRUCTIONS
WARNING: Risk of
fire.
Do not operate heater without wheel
assemblies attached. Operate heater in upright position only
(wheels on bottom, controls on top). Any other position could create
a hazardous situation. Ensure that the surface beneath the heater is
clean and free of any obstructions. It is not recommended that this
heater be placed on high-pile carpeting or any other surface that
impedes the
flow
of air underneath the heater.
1. Plug in the heater.
2. Turn the thermostat knob to the maximum position.
3. Switch the heater on by setting the power switch to the desired heat
setting.
1
―
Low heat
2―
Medium heat 3
―
High heat
The power indicator light will illuminate.
4. When the room has reached the required temperature, turn the
thermostat knob slowly anticlockwise until the power indicator light
goes out (or until a click is heard).
5. Turn the thermostat knob to this position to set the desired
temperature.
The power indicator light will turn on and off, indicating the thermostat
is keeping room temperature at the selected setting.
6. To turn the heater off, set the power switch to the “0” position and
remove plug from the mains socket.
5
SAFETY FEATURES
Safety Tip-over switch:
The heater features a tip-over switch. If the heater tips over, it will
automatically switch off. Once placed back into the upright position, the
heater will automatically switch on again.
Overheat protection:
The heater is equipped with a safety device. The safety device will trip
and turn the heater off in the event of overheating.