PROBLEM SOLVING
05
Connecting to an electrical socket
Please check that the voltage indicated on the product corresponds with your supply voltage.
Problem
Possible cause
Solution
The vacuum
cleaner does
not turn on
•
Too much dust in the cup
•
Filter is blocked
•
Hose is blocked
•
Empty the dust cup
•
•
Clear the blockage
The vacuum
cleaner does
not work
•
Electrical outlet is not
The dust cup is filled
connected or not working
•
Power switch was not
turned on
•
Ensure the plug is properly connected in
the socket and the socket is active
•
Press the power button
The vacuum
cleaner
suddenly
stops
•
•
•
Suction inlet of brush or
accessories is blocked
•
Empty the dust cup
•
•
Clear the blockage
Make sure vacuum is turned off and power cord is unplugged.
!
N O T I C E: Thermal cut-off
This vacuum cleaner has a special thermostat that protects the vacuum in case of motor overheating.
If the vacuum suddenly shuts off
, proceed as follows: 1) Push the power switch to off and
unplug the vacuum. 2) Check the vacuum for a possible source of overheating such as a full dust cup,
blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes
before attempting to use the vacuum. 3) After the
30 minute
period, plug the vacuum back in and
turn on the switch. If the vacuum still does not work, call the Eureka Customer Service
HELPLINE
at
1-800-282-2886
.