CAUTION
If you detect any water leaks while your washer is filling or draining,
check the water connections. See
Connect the water hoses
on page
18 or
Connect the drain hose
on page 20.
If your washer rocks or vibrates excessively, level it again. See
Level
your washer
on page 22.
•
•
WARNING
Make sure that the power voltage at your location is the same as the
voltage on your washer's rating label.
Do not use a multi-purpose plug or socket.
Do not use an adapter.
Do not use an extension cord.
Do not touch or pull out the plug with a wet hand.
When you unplug the power cord, hold the plug not the power cord.
If power cord is damaged or has any sign of being broken, replace
the cord.
Leave the tub empty.
Press the
Power
button to turn on your washer.
Turn the cycle selector to select the
Rinse&Spin
cycle.
Press the
Start/Pause
button to start the test cycle. Your washer
shouldn’t rock or vibrate excessively when water is filling the tub, or when
washing or spinning. Your washer should drain well during the spin cycle.
Run a test cycle to make sure that your washer is correctly installed.
•
•
•
•
•
•
•
•
•
•
•
24
Run a test cycle
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Tro
ub
le
sh
oo
tin
g
