Caution
•
•
Don’t overtighten the fittings or apply tape or sealant to the faucets
or water supply intakes. This can damage the fittings.
Make sure that the water supply hoses aren’t twisted or bent. A bent
or twisted hose can leak and cause an electric shock because of water
leakage.
Caution
•
Make sure that the connection between the drain hose and the wash
basin, standpipe, or laundry tub is not airtight.
Connect the drain hose in one of the following ways.
In a wall standpipe
5.
Tighten the fittings by hand until they are snug, then tighten them an
additional two-thirds of a turn with pliers or a wrench.
6.
Turn on the hot and cold water supplies, then check all the water supply
intake connections and the faucets for water leaks.
NOTE:
The wall standpipe drain requires a minimum diameter standpipe
of 2" (5 cm).
Place the drain hose into the wall standpipe. You can use a nylon ties (not
included) to bundle the hoses and the drain pipe together.
Wall standpipe
Drain hose
Nylon tie
20
Connect the drain hose
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Tro
ub
le
sh
oo
tin
g
