15
Washer dimensions and installation measurements
Make sure that the location is:
A grounded electrical outlet located within 6 ft. (1.8 m) of where the
power cord is attached to the back of the washer. See
Electrical
requirements
on page 11.
Hot and cold water faucets located within 4 ft. (1.2 m) of the hot and
cold water fill valves, and water pressure of between 0.05MPa~1MPa.
A level floor with a maximum slope of 1 in. (25 mm) under entire
washer. Don’t install your washer on soft floor surfaces, such as
carpets or surfaces with foam backing.
A sturdy and solid floor to support the washer with a total weight
(water and load) of 200 lbs. (90 kg)
•
•
•
•
Away from direct sunlight. Direct sunlight can raise the water
temperature, which may cause safety risks.
An area where the temperature is above 32° F (0° C).
Away from the heat resources such as coal or gas. Heat sources can
raise the water temperature, which may cause safety risks.
•
•
•
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Tro
ub
le
sh
oo
tin
g
42.5 in. (108 cm)
33.5 in. (85 cm)
25.6 in. (65 cm)
23.5 in. (59.5 cm)
