38
Problem:
Possible Reason:
Oven:
Unable to use
MSmartLife app
to control oven
Strong "burning"
or "oily" odor when
using new oven.
Clicking noise can be
heard when oven is
operating
Control is dark and
will not respond
If WiFi signal icon is flashing slowly, WiFi has not been
connected. See instructions in "Preparing For First Use."
If WiFi signal icon is flashing quickly, WiFi signal has
been lost. Check that router is on and no obstructions
are hindering signal. Can try to reset router and wait 15
minutes to reconnect. Otherwise repeat connection
instructions in "Preparing For First Use."
If WiFi signal icon is off, has not been
enabled. Press the button to enable. WiFi signal
icon will turn on.
This is normal with a new range and will disappear after
a few uses. Still, to be careful, you should double-check
that all packaging has been removed from the appliance
- check around door sides and inside drawer.
The oven burner cycles on and off to maintain the oven
temperature selected. When burner turns on, the electric
spark ignition may be heard periodically. Should spark for
only a couple seconds, followed by sound of burner
igniting. This is normal.
If control panel display shows only "]" or "] [", the control
is in Sabbath Mode. Refer to that section for how to
operate control and how to exit Sabbath Mode.
Control is on but will
not respond
If display shows only "]" or "] [" then Sabbath Mode
setting must be turned off.
Check that "CONTROL LOCK" has not been activated.
Oven door is locked
and will not open.
Turning power off and back on at the breaker box can
usually reset the oven control and clear response issues.
If self-clean recently finished, this is normal. Wait for the
oven to cool fully and it will unlock. Otherwise, try
resetting the appliance by cycling the circuit breaker off
and on.
Door will not close
properly
Door is not installed properly. See instructions on
removing and re-installing door in "Cleaning and
Maintenance" section.
IMPORTANT
SAFETY
INSTRUCTIONS
BEFORE
STARTING
INSTALLATION
INSTALLATION
PROCEDURE
CONFIRM
OPERATION
TROUBLESHOOTING
SAFETY
DEFINITIONS
