Midea MGD2020D, Руководство пользователя

Страница: 16 / 26

1
Safety Cautions
Before using, please read the Safety Cautio ns completely, and use the appliance
in accordance with the requirements to avoid any damage to persons or properties.
WARNING
Never use this appliance for any purpose other than ironing clothes.
Never use other high-power electric applia nce on the same socket to
avoid overload of circuits.
Never dismantle this appliance on your own. Any person other than
qualified personnel shall not dismantle and repair the appliance, and
otherwise it may cause fire, electric shock or personal injury.
Before switching on the garment steamer, please check
the plug and
power cord carefully, and in case of damage, never use them.
Replacement must be
conducted by the manufacturer or its repair
department or similar professionals to avoid danger.
Before inserting or pulling off the plug, be sure to switch off the appliance.
When inserting or pulling off the plug, be sure to hold
the plug with
a hand, and never pull the power cord or operate with a wet hand.
Before adding water, be sure to switch off first.
Please send the product to the after-sale repair agency
authorized by
this company for repair.
Before operation of the garment steamer, make sure that supporting
surface is even and secure to prevent
the garment steamer from
overturn or water from overflow.
Never heat the water tank when it has not been placed properly or water
level is not enough.
Never put perfume, vinegar, detergents or other chemicals into the water
tank. Otherwise they will stain the clothes and damage the garment
steamer.
All appliances in the product must be placed beyond the reach of babies
or the disabled to prevent any danger such as electric shock and
scratch. During operation of the garment steamer, the user shall not
leave.
When the garment steamer is operating, prevent the danger arising
from steam splashing, do not have its spray nozzle towards people to
avoid scald.
When the garment steamer is operating, its spray nozzle, air duct and
air duct joint will become very hot. Therefore, never touch them to avoid
scald.