Midea MGD2020D, Руководство пользователя

Страница: 19 / 26

4
Installation Instructions
Preparation Work
Note
•
When adjusting the height of the support rod, please hold the support rod, open the fixed levers on both sides, and
lock it after
adjusting the height to prevent the support rod from slipping and pinching your fingers.
• If you need to take out the support rod, please loosen the bottom fixed lever, retract the support rod to the
shortest and lock it, and then take out the support rod fr
om the main machine.
Installation of ironing board and cloth cover
Ironing board A
Connector 2
Connector 1
a. Assemble the ironing board A and ironing board B together
Ironing board B
(2)
The aluminum rod 2 is rotatable
End of
aluminum rod 2
End of
aluminum rod 1
Aluminum rod 3
b. Expand the landing support rod components
(1)
Main control lever, the aluminum
rod 1 is stretchable
Lever of support rod
(Rotate the lever to loosen and lock)
(1) Loosen the support
rod lever
(2)
Adjust the length of
the aluminum rod 1
and insert the end
of the aluminum
rod 1 into the
connector 1
(4)
Put the aluminum
rod 3 into the
groove and lock
the lever
clockwise.
(3)
Insert the end
of the aluminum
rod 2 into the
connector 2
(3) Tighten the cloth cover
(1)
Place the ironing board evenly on
the cloth cover
(2) Hang the rope buckle on the hook
c. Install the support rod components on the ironing board d. Install the Ironing board components onto the cloth cover