17
17
17
20.
Undo the absorber pin
I.Undo the front panel.
II.Use pliers to pinch the
absorber pin’s protuberance,
and knock the absorber pin out
from back lightly; in the same
way, remove the other two.
21.
Undo the tub assemble
I.Undo the rear cover, top cover,
control panel, front panel, top
bracket, lower counterweight,
detergent box, the absorber pin,
water level sensor.
II.Undo all connection between
tub assemble and cabinet
assemble.
III.Push the rest down to front
slowly and carefully.
IV.Take off the cabinet from the
tub assemble carefully.
2 2 .
U n d o t h e t u n n e l
assembly
I.
Undo the tub assemble.
II. Remove 2 screws on the
clip spring.
III. Undo 5 screws on tunnel
cover.
IV. Undo 6 screws on the
condenser.
V. Undo the clamp and then
take the tunnel assemble
down.
3 UNPACKING WAYS OF MAIN PARTS
