14
14
8.
Undo the lower
counterweight
I.
Remove the front panel.
II. Remove 4 screws and pull
out the lower
counterweight.
9.
Undo the inlet valve
I.
Remove the top cover
plate.
II. Unplug connector and
undo 2 screws between
cabinet and inlet valve.
III. Release the clamp fixing
the inlet valve and the
inlet hose, and then pull
out the inlet hose.
10.
Undo the detergent box
I.
Remove the control panel.
II. Release the hose clamp
and pull out the inlet
hose.
III. Release the hose clamp
and pull out the
detergent box hose, and
then take out the
detergent box.
11.
Undo the water level
sensor
I.
Remove the top cover
plate.
II. Pull out the plug on the
water level sensor.
III. Loosen the water level
sensor hose clamp and
pull out the hose from
the water level sensor.
IV. Rotate the water level
sensor anticlockwise by
90º, and then pull out the
water level sensor.
3 UNPACKING WAYS OF MAIN PARTS
