12
12
12
Operation
Picture
1.
Undo the rear cover
I.
Undo the 4 screws
between the rear plate
and the cabinet, and then
pull it out.
2.
Undo the top cover
I.
Undo 2 screws fit back
Cabinet.
II. Push back the top cover
15mm until it leaves away
from the control panel,
and then take it down.
3.
Undo the control panel
I.
Remove the top cover
plate.
II. Draw out the detergent
drawer.
III. Loosen 2 screws on the
control panel.
IV. Loosen 2 screws on the
control panel.
V. Tilt the control panel and
take it out.
3 UNPACKING WAYS OF MAIN PARTS
