Midea HS-36I, Руководство по обслуживанию

Страница: 10 / 27

Maintenance Service and Trouble Shooting
4 Troubleshooting Guide
PROBLEM POSSIBLE CAUSE
APPLIANCE DOES NOT OPERATE.
NOT PLUGGED IN.
THE CIRCUIT BREAKER TRIPPED OR A
BLOWN FUSE.
THE APPLIANCE POWER SWITCH IS SET AT
"0FF".
NOT PRODUCING ICE, UNIT NOT COLD
ENOUGH
NCE ARM IS SET TO THE OFF POSITION.
WATER SUPPLY IS TURNED OFF.
WATER LINE IS CRIMPED.
TEMPERATURE CONTROL IS NOT SET
PROPERLY (POSITION 5 OR 6).
COMPRESSOR TURNS ON AND OFF
FREQUENTLY.
THE ROOM TEMPERATURE IS HOTTER THAN
NORMAL.
THE
DOOR IS OPENED TOO OFTEN.
THE DOOR IS NOT CLOSED COMPLETELY.
THE DOOR GASKET DOES NOT SEAL
PROPERLY.
THE
APPLIANCE DOES NOT HAVE THE
CORRECT CLEARANCES.
VIBRATIONS. CHECK TO ASSURE THAT THE APPLIANCE IS
LEVEL.
THE APPLIANCE SEEMS TO MAKE TOO MUCH
NOISE.
THE RATTLING NOISE MAY COME FROM THE
FLOW OF THE REFRIGERANT, WHICH IS
NORMAL.
AS
EACH CYCLE ENDS, YOU MAY HEAR
GURGLING SOUNDS CAUSED BY THE FLOW
OF REFRIGERANT IN YOUR APPLIANCE.
CONTRACTION AND EXPANSION OF THE
INSIDE WALLS MAY CAUSE POPPING AND
CRACKLING NOISES.
THE APPLIANCE IS NOT LEVEL.
THE DOOR WILL NOT CLOSE PROPERLY.
THE APPLIANCE IS NOT LEVEL.
THE DOOR IS REVERSED AND NOT
PROPERLY INSTALLED.
THE GASKET IS DIRTY.
THE BUCKET IS OUT OF POSITION.
ICE CUBES ARE MELTED TOGETHER
APPLIANCE DOOR IS OPENED TOO OFTEN.
TEMPERATURE CONTROL IS NOT SET
PROPERLY.