Midea HC-957WEN, Руководство по обслуживанию, Страница: 10 / 59

Service Manual_2018-V2.0
10
4. Installation and commissioning
4.1Door Disassembly and Assembly
The refrigerator door needs to be dismantled if it cannot enter the room in the whole.
Disassembly of Freezer door
1) Use cross screwdriver to remove the screws by
anticlockwise, and then take out the protective cover.
2) Pull out the spacing guard sheet at the two ends of
water connector, and then push the locked cushion
inwards, meantime pull out water pipe.
Note: please make sure the fast connector c
an’t be left at
the end of water pipe of door
3) As shown as right photos, use screwdriver to remove
the 5 pcs screws, and then remove the upper hinge
cover.
1) Disconnect the 5pcs fast connectors, then use cross
screwdriver or socket spanner to remove the 2pcs
M5 screws and 1 pc grounding screw by
anticlockwise.
Note: please make sure the freezer door fit closely to
the cabinet; otherwise the refrigerator door may fall
down during above operation.