:
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
46
DISASSEMBLY INSTRUCTIONS (CONT)
Electrical Parts
Procedure
Illustration
1) Remove one screw from the electrical
control box subassembly.
If you want to repair the electrical control
box components, perform step #1.
If you want to repair the main control board
assembly, perform steps #2 to #5 below.
2) Cut the ribbon by a shear, then pull
out the coil temperature sensor (T2).
3) Remove one screw from the electronic
control box and two screws used for
the ground connection.
T2 Sensor
Ground Screws
