Middleby Marshall PS629E Series, Руководство владельца по эксплуатации и установке

Страница: 25 / 52

SECTION 3
OPERATION
25
III. MEASURING CONVEYOR SPEED
See Figure 22 and Figure 23.
To check conveyor speed, place a product item at the
entrance end of baking chamber as shown. Time how
long it takes for the leading edge of the item to go from
the entrance end of the baking chamber to the exit
end. This should be the conveyor speed shown on the
conveyor speed digital control.
NOTE: In Figures 22 and 23, the oven shown is with
the conveyor running right to left.
WARNING
Possibility of injury from rotating parts and
electrical shock.
Never disassemble or clean the oven with the
blower switch or any other part of the oven
turned “ON” or “I”. Turn “OFF” or “O” and
lockout or tagout all electrical power to the oven
before attempting to clean or service this oven.
Product at entrance end of baking
chamber – BEGINNING OF TIMING
Product at exit end of baking
chamber – END OF TIMING
WARNING
Keep oven clear of combustibles at all times.