background image

 

iii 

Model No. _________________________ Serial No. _________________________ Installation Date____________________ 

 

MIDDLEBY MARSHALL 

NO QUIBBLE LIMITED WARRANTY 

(U.S.A. ONLY) 

MIDDLEBY MARSHALL HEREINAFTER REFERRED TO AS “THE 
SELLER”, WARRANTS EQUIPMENT MANUFACTURED BY IT TO 
BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP 
FOR WHICH IT IS RESPONSIBLE. THE SELLER’S OBLIGATION 
UNDER THIS WARRANTY SHALL BE LIMITED TO REPLACING 
OR REPAIRING AT SELLER’S OPTION, WITHOUT CHARGE, 
ANY PART FOUND TO BE DEFECTIVE AND ANY LABOR AND 
MATERIAL EXPENSE INCURRED BY SELLER IN REPAIRING OR 
REPLACING SUCH PART. SUCH WARRANTY SHALL BE 
LIMITED TO THE ORIGINAL PURCHASER ONLY AND SHALL BE 
EFFECTIVE FOR A PERIOD OF ONE YEAR FROM DATE OF 
ORIGINAL INSTALLATION OR 18 MONTHS FROM DATE OF 
PURCHASE, WHICHEVER IS EARLIER, PROVIDED THAT 
TERMS OF PAYMENT HAVE BEEN FULLY MET. 

This warranty is valid only if the equipment is installed, started, and 
demonstrated under the supervision of a factory-authorized installer. 

Abuse, acts of God, belt jams, cleaning, customer abuse, insufficient 
utilities, lubrication, maintenance, non-oven related issues, 
preventative maintenance, or normal maintenance function 
including adjustment of airflow, burners, conveyor components, 
door mechanisms, microswitches, pilot burners, thermostats, and 
replacement of bushings, light bulbs, fuses, indicating lights, and 
wear points, are not covered by this 

no quibble warranty

Seller shall be responsible only for repairs or replacements of 
defective parts performed by Seller’s authorized service personnel. 
Authorized service agencies are located in principal cities 
throughout the contiguous United States, Alaska, and Hawaii. This 
warranty is valid in the 50 United States and is void elsewhere 
unless the product is purchased through Middleby International with 
warranty included. 

The foregoing warranty is exclusive and in lieu of all other 
warranties, expressed or implied. There are no implied 
warranties of merchantability or of fitness for a particular 
purpose. 

The foregoing shall be the Seller’s sole and exclusive obligation and 
Buyer’s sole and exclusive remedy for any action, including breach 
of contract or negligence. In no event shall Seller be liable for a sum 
in excess of the purchase price of the item. Seller shall not be liable 
for any prospective or lost profits of the buyer. 

This warranty is effective on Middleby Marshall equipment sold 
on, or after January 1st, 2007. 

© 2019 - Middleby Marshall, A Middleby Company. 

MIDDLEBY MARSHALL 

OVEN LIMITED WARRANTY 

(Non U.S.A.) 

The Seller warrants equipment manufactured by it to be free from 
defects in material and workmanship for which it is responsible. The 
Seller’s obligation under this warranty shall be limited to replacing 
or repairing, at Seller’s option, without charge, F.O.B. Seller’s 
factory, any part found defective and any labor and material 
expense incurred by Seller in repairing or replacing such part. Such 
warranty is limited to a period of one year from the date of original 
installation or 15 months from date of shipment from Seller’s factory, 
whichever is earlier, provided that terms of payment have been fully 
met. All labor shall be performed during regular working hours. 
Overtime premium will be charged to the Buyer. 

This warranty is not valid unless equipment is installed, 
started, and demonstrated under the supervision of a factory-
authorized installer. 

Normal maintenance functions including lubrication, adjustment of 
airflow, thermostats, door mechanisms, microswitches, burners and 
pilot burners, and replacement of light bulbs, fuses, and indicating 
lights, are not covered by warranty. 

Any repair or replacement of defective parts shall be performed by 
Seller’s authorized service personnel. Seller shall not be responsible 
for any costs incurred if the work is performed by anyone other than 
the Seller’s authorized service personnel. 

When returning any part under warranty, the part must be intact and 
complete, without evidence of misuse or abuse, freight prepaid. 

Seller shall not be liable for any consequential damages of any kind 
which occur during the course of installation of equipment, or which 
result from the use or misuse by Buyer, its employees or others of 
the equipment supplied hereunder, at Buyer’s sole and exclusive 
remedy against Seller for any breach of the foregoing warranty or 
otherwise shall be for the repair or replacement of the equipment or 
parts thereof affected by such breach. 

The foregoing warranty shall be valid and binding upon Seller if and 
only if Buyer loads, operates, and maintains the equipment supplied 
hereunder in accordance with the instruction manual provided to 
Buyer. Seller does not guarantee the process of manufacture by 
Buyer or quality of product to be produced by the equipment 
supplied hereunder and Seller shall not be liable for any prospective 
or lost profits of Buyer. 

The foregoing shall be Seller’s sole and exclusive obligation and 
Buyer’s sole and exclusive remedy for any action, whether in breach 
of contract or negligence. In no event shall Seller be liable for a sum 
in excess of the purchase price of the item. 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF 
ALL OTHER EXPRESS AND IMPLIED WARRANTIES 
WHATSOEVER. SPECIFICALLY THERE ARE NO IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. 

 

Middleby Cooking Systems Group 

 

1400 Toastmaster Drive 

 

Elgin, IL 60120 

 

(847) 741-3300 

 

FAX (847) 429-7508 

 

Содержание PS629E Series





















































Отзывы: