Middle Atlantic C3-XX-LDXU Скачать руководство пользователя страница 13

Страница: 13 / 14

WARRANTY

For warranty information, refer to http://www.middleatlantic.com/company/about-us.aspx#warranty

Corporate Headquarters

Voice: 973-839-1011 - Fax: 973-839-1976 - International Voice: +1 973-839-8821 -

Fax: +1 973-839-4982 - www.middleatlantic.com - [email protected]

Middle Atlantic Canada

Voice: 613-836-2501 - Fax: 613-836-2690 - ca.middleatlantic.com -

[email protected]

Middle Atlantic EMEA Technical Support

Voice: +31 (0) 495 726002 - [email protected]

Factory Distribution

United States: New Jersey, California, Illinois - Canada: Ontario - The Netherlands: Weert

At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.

UNDERSTANDING NEXT STEPS

If your installation includes a purchased fan kit and/or a large cover option (for your purchased display

option), after installing this and any other options you may have purchased for your credenza, refer to

the C3 Series WoodKit instruction sheet (100-00040) to install your woodkit, and then refer to the C3

Series Fan Kit (C3-FANKIT) instruction sheet (100-00039) and/or C3 Series Display Mount Large

Cover Option instruction sheet (100-00035) to install your fan kit and/or your large cover option,

respectively.

NOTE

• Kits and options other than the fan kit and large cover option should be installed before your woodkit

is attached to the frame.

• Attaching your display(s) (display(s) not included) to the horizontal extrusion of the display mount

option (C3-XX-LDXU, if purchased) must be done as the final part of your C3 installation process.

For more information, refer to "Attaching Your Display to the Horizontal Extrusion" on page 11.

Page 13

Содержание C3-XX-LDXU















Результаты поиска

Содержание C3-XX-LDXU

Отзывы:

Похожие инструкции для C3-XX-LDXU

Бренды по названию

Популярные бренды

Middle Atlantic C3-XX-LDXU, Инструкция

Результаты поиска

Содержание C3-XX-LDXU

Отзывы:

Похожие инструкции для C3-XX-LDXU

Бренды по названию

Популярные бренды