Page 22
FIGURE AH
3. Use power driver or screwdriver and (16x or 24x for 2-piece tabletop models*, 8x for 1-piece models)
1 1/2” wood screws (F) to attach the trough edges (A) to the tabletops (D) as shown. (
FIGURE AH
)
F
FIGURE AG
ATTACHING THE BASE ASSEMBLY TO THE TABLETOP(S) (CONTINUED)
2. Use power driver or screwdriver and (12x for 2-piece tabletop models, 8x for 1-piece models) 1”
wood screws (G) to attach the pedestal bases to the top as shown. (
FIGURE AG
)
G
Tabletop
Seam
CAREFUL
: Use the 1" wood screws (G) and
not the 1 1/2" wood screws (F) for this step,
otherwise tabletop dameage will result.
NOTE
: Use the 1 1/2"
wood screws (F) and
not the 1" wood screws
(G) for this step.
*Standard hardware quantites for 12’ and 16’
2-piece tabletops, respectively.
Amounts for custom tabletop lengths may vary.
