Page 17
INSTALLING LEVER LOCK INTO THE SWING-OUT RACK (CONTINUED)
FIGURE W
NOTE
:
• The Lever Lock plates may be installed on the brackets at different depths. (
FIGURE V
)
• All 4 corners of the Lever Lock plates must be inserted into the brackets at the same depth in order to
function correctly.
• (20x) Lever Lock plate washers (AC) are provided for equipment mounting convenience.
5. Attach the 2” and/or 10” Lever Lock plate (Z and AA, respectively) by installing the side without the
clip into the brackets first. Then install the side with the clip until it clicks into place. (
FIGURE W
)
Side with
clip
Side without
clip
Clip
NOTE
: Install plastic securing
rivet (AB) into hole to secure
the clip more permanently, if
desired.
NOTE
: 10” Lever Lock plate shown.
6. Use (4x) 10-32 x 3/4” truss
screw with washers (Y) to
secure the face after panel (AD)
to the rack. (
FIGURE X
)
FIGURE X
Y
AD
