Page 13
FIGURE N
Cables positioned
toward inside back
corners of pedestal.
INSTALLING THE FAN OPTION (T5-DCFANKIT-1)
1. Use (4x per fan) 10-32 x 3/8” fan mounting screws (AF) to install each fan (AG) upward into the
opening on the pivot bracket (V) with the cables positioned toward the back corners as shown.
(
FIGURE L
)
Inside of Pedestal
AF
AG
3. Use (2x) #6 x 3/8” controller mounting screws (AJ) to mount the inline fan controller (AH) at the
location of the pre-drilled holes on the upper-back inside of the pedestal. (
FIGURE N
)
2. Install the jumper on the inline fan controller (AH)
for the following functions:
• Jumper on two center pins (pre-installed location)
turns the fan on at 87º and off at 85º. (
FIGURE M
)
• Jumper on two left pins, fan will remain off.
• Jumper on two right pins, fan will remain on.
FIGURE M
Side View of Inline Fan Controller
AH
Jumper
Inside of Pedestal
Pre-Drilled
Holes
AJ
AH
V
FIGURE L
