Midas HERITAGE 1000, Руководство оператора

Страница: 30 / 66

masters
stereo
to
mono
solo
solo
add
MIDAS HS1021
10
10
5
5
0
20
15
30
40
10
10
5
5
0
20
15
30
40
10
10
5
5
0
20
15
30
40
10
10
5
5
0
20
15
30
40
CLEAR
ON
PRE PFL
LEFT
ON
MONO RIGHT
mute mute mute
The SOLO ON / CLEAR switch and
indicator has two functions; it
illuminates when any solo switch is
active and when pressed it clears any
active solo switches.
The SOLO ADD MODE switch
allows multiple channel access to the
solo busses. When the solo add mode
is off the action of pressing a solo
switch will cancel any previously
active solo. Multiple solos such as
stereo left and right signals can be
monitored in this mode of operation as
long as the solo switches are pressed at
approximately the same time. When
the solo add mode is on the auto
cancelling is defeated which allows
multiple channel or output soloing. In
this mode input solos have priority
over output solos and will temporarily
override them. When the input solo is
cancelled the output solos will return.
The SOLO PFL switch sends the mono
PFL solo bus signals to the headphones
and local monitor outputs in place of
the stereo AFL or SIS solo bus signals.
The st to mono ON switch sums the
pre fader left and right mix signals and
sends them to the mono bus.
The PRE switch sources the left and
right signals pre master insert points.
The three master MUTE switches cut
the three main output signals post fader
but CAN NOT be used as part of the
console snapshot system.
The three master FADERS control the
output levels from the main mix from
+10dB to off. The faders and the mute
switches above are mounted on wire
loom assemblies which provides a
means to customise the order (LEFT,
RIGHT, MONO or LEFT, CENTRE,
RIGHT etc.) to suit operating
conditions and personal preference.
20