©2019 Mid West Products, Inc.
-4-
Form No. M1-1728
1. BRUSH HEIGHT ADJUSTMENT: You can sweep both
lawn and paved areas by a simple adjustment of the
Brush. To raise Brush to sweep your lawn, merely
squeeze Brush Control and push down on front of
Bumper Tube. At the same time, with the other hand,
pull up on right corner of Chassis. To lower Brush, just
reverse above instructions. See Figure 5. Whenever
sweeper seems to push hard, merely raise Brush one
notch higher. For best operation on lawns the Brush
should merely flick the top of grass blades.
2. DUMPING SWEEPER: Release Hamper Hanger from
Side Hamper Tubes. Then, lift front Hamper Rod up
and to rear of sweeper. Now, remove rear Hamper Rod
from Hooks (14) and lift Hamper from sweeper. If
dumping location is far from sweeping area, it may be
desirable to pile several Hamper loads of debris on a
tarpaulin for faster removal to dumping location.
3. STORAGE: Just fold Stand forward under Chassis.
Hamper will fold itself when sweeper is hung on wall or
set in corner against wall for compact winter storage.
4. NO LUBRICATION REQUIRED: Brush Axle Bearings
are lubricated and sealed during factory assembly. No
other lubrication is necessary. DO NOT OIL OR
GREASE GEARS IN WHEELS. If oil or grease is
applied to these parts the Brush will not rotate. Then it
is necessary to re-move Wheel and wipe all parts clean.
5. When servicing or replacing the Pinion or Pawl Pins
please refer to the PINION & PAWL INSTALLATION
Figure. Right (R) and Left (L) notations on the Pinion
Gears are from your position behind the Lawn
Sweeper.
6. Your Lawn Sweeper is precision manufactured by
experienced craftsmen, using the very finest in tools
and materials. Although it is ruggedly constructed, do
not subject it to misuse.
CAUTION: DO NOT PUSH
SWEEPER TOO CLOSE TO FIRE
–
the Brushes will
burn.
BE SURE TO WIPE OFF YOUR LAWN
SWEEPER AFTER EACH USE.
Store in a dry place
out of direct sunlight. Don’t permit the sweeper to stand
in the hot sun unless it is in actual use.
You will find many work-saving uses for your Lawn
Sweeper. Use it in the early Spring to give your lawn a good
healthful scrubbing. Use it throughout the Spring and
Summer both before and after mowing. Sweeping before
mowing stands up the grass for a clean, even mowing
–
and protects your mower from sticks, stones, or nuts which
might damage the blades of your mower. After mowing,
your Lawn Sweeper will whisk away unsightly grass
clippings
– leaving your lawn velvety smooth.
OPERATION
GUARANTEE
The merchandise you have purchased from us has been carefully engineered and manufactured under
Mid West Products rigid quality standards and should give you satisfactory, dependable operation.
However, like all mechanical merchandise, it may occasionally require adjustment or maintenance.
Should you need technical assistance, please contact MID WEST PRODUCTS.
INSTRUCTIONS FOR ORDERING PARTS
(Minimum Parts Order Charge $20.00)
1. Address all parts orders or correspondence regarding customer service to one of the following:
Parts Dept.
Phone:
(937) 337-3641
Mid West Products, Inc.
P.O. Box 301
E-mail:
Phillipsburg, OH 45354
Website:
2. Write your name and address plainly (print or type).
3. Explain where and how to ship.
4. Give model number of unit.
5. Give part number from parts list, as well as a description, including color, of the part and the quantity you need.
6. Inspect all shipments you receive. If any parts are damaged or missing, file a claim with the carrier before accepting.
7. If you are returning parts, be sure to include WITH THE SHIPMENT a list of the parts with your name and address.
8. All orders for repair and replacement parts will be shipped when paid with Master Card, Visa, or personal
check/money order. Prices subject to change without notice.
