Micsig TO1072, Краткое руководство пользователя

Страница: 73 / 169

70
Figure 6-8 Open Cursor Selection Box and Close Cursor
Vertical cursor movement descriptions:
1)
Use a single finger to press and hold the cursor indicator on the screen to make coarse adjustment to the
cursor; tap the fine adjustment button in the lower left corner of the screen to fine-adjust the cursor that has
just been adjusted.
2)
Cursor linkage: When the cursor is opened, two finger slide and enter the cursor linkage state.
Note: During the sliding process, the current operation is changed unless the initial two fingers leave the
screen. If one finger leaves the screen and the other finger does not leave, the current linkage adjustment is
continued.
3) Open the cursor, tap , select the "cursor" item, and the cursor will automatically adjust to the center
position of the screen on both sides of the horizontal or vertical.
Horizontal cursor on/off and activation
Horizontal cursor on/off, switching, activation and movement operations, similar to those of vertical cursors, will
not be described in detail here, and please refer to vertical cursors for details.
Cursor test example
When vertical cursors are activated, the two cursors move together to check for pulse width changes in the pulse
sequence.