Microwave Radio DS-2, Руководство оператора

Страница: 19 / 24

2-1 DS-2 IF Diversity Switch Operator’s
2
Section
400462-1
Rev. A
2 System Installation
This section explains how to install the DS-2 IF Diversity Switch. The following topics are
covered:
• Unpacking and Handling
• Installation Prerequisites
• Rack Installation
2.1 Unpacking and Handling
Each unit is shipped assembled, wired, and factory tested. Each unit is packaged in
appropriate shipping containers. Care should be taken when removing equipment from the
container to prevent damage to the unit. Check that all parts and accessories are removed
from the container and packing material before they are discarded. Verify that the
equipment items shipped agree with those listed on the sales order.
Note: DO NOT discard the container or any packing material until the
mechanical inspection has been satisfactorily completed. This
material must be available in the event that a damage claim needs to
be filed with the shipping carrier.
2.1.1 Inspection
Inspect the equipment for any shipping damage. Check that the equipment is clean and that
no cables or connectors are broken, damaged, or loose.
Note:
At the time of inspection, DO NOT make any adjustments to internal
controls or adjustments. The equipment has been factory adjusted for
proper operation prior to shipment.
2.1.2 Damage in Shipment
Should any damage be discovered after unpacking the unit, use the following procedure:
1.
Immediately file a claim with the shipping carrier.
2.
Forward a copy of the damage report to Microwave Radio Communications.
3.
Contact Customer Service at which time they will determine the disposition of the
equipment.
For Customer Service information, see the Preface section of this manual.