Routine Operation
3-157
SCM4000
Operator’s Guide/Tech Ref Manual
The procedure required to monitor and clear the error log is
contained in the following steps.
1.
Verify the SCM4000 is powered up.
2.
Verify the Main Screen is displayed.
. If the Main Screen is not displayed, press the
ESC
key repeatedly until the Main Screen is
displayed.
Figure 3-453: Main Screen Menu - Typical
3.
Press the Down arrow key, as required, to move the
>>
cursor to the
System Menu
option.
4.
Press the
SEL
key or Right arrow key and observe the
System
Menu
is displayed.
.
Figure 3-454: System Menu - Typical
5.
Press the Up or Down arrow keys, as required, to
move the
>>
cursor to the
Error Log
option.
6.
Press the
SEL
key or Right arrow key to select the
Error log
option and observe the
Event Log
menu is
displayed.
.
SCM4000
>> Modulator
System Menu
System Menu
>> Preset Menu
Active Errors
Error Log
Note
Error Codes shown in
are typical.
See the
“Troubleshooting” Chapter on page 4-1
for
the complete list of possible SCM4000 Error
Codes.
Figure 3-455: Event Log - Typical
7.
Press the Up or Down arrow keys, as required, to
review the
Event Log
list of errors or events (if
present).
Note
If you wish to clear the
Event Log
of all listed
errors or events, go to step 8.
If you do not wish to clear the
Event Log
of all
listed errors or events, go to step 12.
8.
Press the Up or Down arrow keys, as required, to
move the
>
cursor to any listed error or event.
9.
Press the
SEL
key or the Right arrow key and observe
the
Clear Log
menu is displayed.
Figure 3-456: Clear Log Menu
Event Log
> E333: DCC -12
E332: DCC +12
E122: MPEG PCR
Event Log
>Yes No
Clear - Log?
Содержание SCM4000
