Microtek Take-it MV500, Руководство пользователя

Страница: 66 / 70

66
• For Windows 98SE , check to see if “Camera Driver” has been
installed on your computer.
Go to the Windows Control Panel and double-click “Add/Remove
Programs”. If the DV camera driver does not appear in the list, you
must install the DV camera driver from the Microtek CD-ROM.
• Check if the DV camera is detected by your system.
1) Right-click the “My Computer” icon and click Properties. The
“System Properties” window appears.
2) Click the “Hardware” tab and then click the “Device Manager”
button. Expand the “Disk drives” tree; the removable disk drive
should be in the list.
A1: The “USB Switch” setting is set to the incorrect mode.
• Enter the Setup mode, and set USB Switch to “USB Mode”.
A2: The DV camera is disconnected to the computer.
• Make sure one end of the USB cable is connected to your computer
and the other end to your DV camera’s USB connector.
• Make sure the USB cable is properly connected to both the DV
camera and the computer.
A1: The “USB Switch” setting is set to the incorrect mode.
• Enter the Setup mode, set USB Switch to “Web Cam”.
A2: The DV camera is disconnected from the computer.
For Windows Users:
• Make sure one end of the USB cable is connected to your computer
and the other end to your DV camera’s USB connector, then turn on
the DV camera.
• Check to see if “Camera Driver” has been installed on your
computer.
Mac OS cannot find the newly
created drive icon (Take-it,
Take-it.SD) on the desktop.
The DV camera does not operate in
Web Cam mode.