MicroStrain Quick Start Guide: 3DM-GX5-45 GNSS/INS
Select serial, and identify your serial port. Clicking the
port select arrow should identify available comm’s ports.
Sensors are factory set to 115200 baud. Click Add Device,
and Done:
Step 8:
Close that window, and click on your device to see settings:
Step 9:
Click on sampling, + add channel field, and Attitude
(Euler RPY). Set data rate to 10Hz or higher.
Then click “apply” and “start”
Step 10:
Click on Data, and +Add Widget.
Step 7:
If you are using RS232, click on Devices, and ‘+ Add Device’.
Step 11:
Click on 3D Model.
