MicroStrain Quick Start Guide: 3DM-GX5-45 GNSS/INS
Step 12:
Your screen will look like this:
Step 13:
Now let’s get data into the model. Under Channels, click on
local data, and click on your device. There will be a green dot
alongside the sensor name, indicating that it’s connected.
Clicking on your sensor
will
bring up a selection of data
channels. Click on Roll, Pitch and Yaw:
Step 14:
Test the linkage to the widget aircraft...pick up the
sensor, and move it in 3 axes. The plane should
respond.
Now you know that your sensor is working, and you’re
in command. Let’s add some other widgets. Click on
+ Add Widget, and select Linear Gauge. Click on the
Gauge icon, and select the Roll data channel, in the local
data list:
The X icon will close this gauge. The page icon to its left
will make duplicates.
Click on the duplicate icon twice, and place two more
linear gauges. Click on each of them, and select pitch
and yaw data. You’ll see the gauge displays move, as you
manipulate the sensor.
