Site 18 of 28
In this dialog you can set the display brightness, the display time of the
status of the TAG-operation and various timeouts. "Response after
Shutdown" determines whether the POCKET enters standby mode or flight
mode after disconnecting the Bluetooth connection.
Configuration of the connection management:
This dialog is used to set the Bluetooth-specific parameters. So you can
switch between the operating modes "server mode" and "client mode"
which are already mentioned.
To use the client mode, the POCKET requires the MAC address of the
associated hosts and the number of service ports for correct addressing
(this depends on the services activated on the Host, mostly the service
number of the SPP profile is 1). The MAC address is also located in the
Bluetooth Manager (see the following figure).
