DOC-iID-POCKETwork-02E.docx
Site 11 of 28
script on the device must be loaded. The script files are provided by
microsensys and can be downloaded to the device by the customer using
the iID
®
INTERFACE Config Tool. Details on how the script files are
downloaded to the device are given in the section "iID
®
INTERFACE Config
Tool".
Scripts can, in the simplest case, consist of a single command, for
example, displaying the UID of the transponder. It can also connect multiple
commands in a script. If this is the case, the various commands are
displayed in a menu on the POCKETwork. In the menu, using the arrow
buttons (1,2) you can navigate and the selection is confirmed by pressing
the SCAN button (3). A script can solve complex tasks. Below you will find
the most important actions that a script contains:
Example of scripts:
Script
Description
HF UID
- after pressing the SCAN button, the
POCKET is in read mode
- the machine scans until a transponder
is read successfully or the SCAN button was
pressed again
- If a transponder has been read successfully,
then this will be confirmed by a beep sound
- Indication of the UID of the transponder on
the display
- by pressing the SCAN button, the indication
is cleared and the POCKET is again in read
mode
HF
temperature
+
pr
TAG Number
- Indication of pressure and temperature
value, TAG number and placing the values
with time stamp in the memory
UHF EPC
Indication of EPC codes on the display and
stored with time stamp in memory
