manualshive.com logo in svg

Microsens MS453522M, Руководство пользователя, Страница: 130 / 237

Поделиться
Скачать
Microsens MS453522M Скачать руководство пользователя страница 130

MICROSENS

 8 Port Gigabit Ethernet Switch 

User’s Manual 

 

 

125

 

 

3-17. Configuration 

The switch supports three copies of configuration, including the default configuration, 

working configuration and user configuration for your configuration management.  All of them 
are listed and described below respectively. 

 

Default Configuration:

  

This is the ex-factory setting and cannot be altered. In Web UI, two restore default 

functions are offered for the user to restore to the default setting of the switch. One is the 
function of “Restore Default Configuration included default IP address”, the IP address will 
restore to default “192.168.1.1” as you use it. The other is  the  function of “Restore Default 
Configuration without changing current IP address”, the IP address will keep the same one that 
you had saved before by performing this function. 

 

Working Configuration:

  

It is the configuration you are using currently and can be changed any time. The 

configurations you are using are saved into this configuration file. This is updated each time as 
you press 

<Apply> 

button. 

 User Configuration:  

It is the configuration file for the specified or backup purposes and can be updated while 

having confirmed the configuration. You can retrieve it by performing Restore User 
Configuration.

 

 
 

  

Fig. 3-61

Содержание MS453522M














































































































































































































































Отзывы:

Нет отзывов