manualshive.com logo in svg

Microsens MS453522M, Руководство пользователя, Страница: 120 / 237

Поделиться
Скачать
Microsens MS453522M Скачать руководство пользователя страница 120

MICROSENS

 8 Port Gigabit Ethernet Switch 

User’s Manual 

 

 

115

 

 

8. 

If user ID and password is correct, the authentication server will send a Radius-
Access-Accept to the authenticator. If not correct, the authentication server will 
send a Radius-Access-Reject. 

9. 

When the authenticator PAE receives a Radius-Access-Accept, it will send an EAP-
Success to the supplicant. At this time, the supplicant is authorized and the port 
connected to the supplicant and under 802.1X control is in the authorized state. 
The supplicant and other devices connected to this port can access the network. 
If the authenticator receives a Radius-Access-Reject, it will send an EAP-Failure to 
the supplicant. This means the supplicant is failed to authenticate. The port it 
connected is in the unauthorized state, the supplicant and the devices connected 
to this port won’t be allowed to access the network. 

10.  When the supplicant issue an EAP-Logoff message to Authentication server, the 

port you are using is set to be unauthorized. 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 3-54 

Access allowed 

 

PC

 

LAN

Bridge

Radius Server

 

Access blocked 

Port connect 

Radius-Access-Challenge 

Radius-Access-Accept 

Radius-Access-Request 

Radius-Access-Request 

EAPOL-Start 

EAP-Response/Identity 

EAP-Response (cred) 

EAP-Request/Identity 

EAP-Request 

EAP-Success 
EAP-Failure 

EAPOL

EAP

Authenticator

Radius 

EAP-Logoff

Содержание MS453522M














































































































































































































































Отзывы:

Нет отзывов