Microsemi IGLOO nano Starter Kit, Руководство пользователя

Страница: 4 / 42

Introduction
4 R e v i s i o n 3
In addition, the Libero SoC tool suite now includes power-driven layout (PDL), which can reduce the
power consumption of designs up to 30 percent.
The evaluation board has a small form factor, measuring 3.2 inches by 4 inches, and supports an
AGLN250 IGLOO nano device in the 14 x 14 mm VQ100 package. The evaluation board consumes less
than 150 mW. All components used on the board, such as LEDs, reset (µA range), and oscillator, are
low-power components. Also included on the evaluation board is a USB-to-UART interface to allow for
HyperTerminal on a PC to communicate with the IGLOO nano device on the board.
The right hand side of the board has a programming connector that enables the low-cost programming
stick (LCPS) to be attached to the board to program the IGLOO nano AGLN250V2-VQG100 device. I/Os
from the FPGA have been wired to pads on the board for debug purposes.
Kit Contents
Table 1 lists the contents of the IGLOO nano Starter Kit.
Web-Based Resources
Listed below are the documents currently published on the Microsemi SoC Products Group website.
Additional documents and design examples may be added to the website in the future.
Users Guides and Tutorials
IGLOO nano Starter Kit User’s Guide
www.microsemi.com/soc/documents/IGLOO_nano_StarterKit_UG.pdf
IGLOO nano Starter Kit Quickstart Card
www.microsemi.com/soc/documents/AGLN_NANO_KIT_QS.pdf
IGLOO nano Starter Kit User’s Guide
www.microsemi.com/soc/documents/IGLOO_nano_StarterKit_UG.pdf
Libero IDE Quick Start Guide
www.microsemi.com/soc/documents/gettingstarted_ug.pdf
Libero SoC User’s Guide
www.microsemi.com/soc/documents/libero_ug.pdf
FlashPro User’s Guide
www.microsemi.com/soc/documents/flashpro_ug.pdf
Table 1 • IGLOO nano Starter Kit Contents
Quantity Description
1 IGLOO nano Evaluation Board with AGLN250V2-VQG100
1 FlashPro3-compatible low-cost programming stick (LCPS)
2 USB 2.0 high-speed cables
1 Quickstart card