Microscan Quadrus MINI Imager, Руководство пользователя

Страница: 332 / 398

13-8
Quadrus MINI Imager User’s Manual
Differences from Default
Differences from Default
Clicking the
Differences from Default
button will cause
ESP
to check all stored configuration
settings and compare them to default settings. All settings that are different than default
will appear in the left column (shown below), and descriptions of those settings will appear
in the right column.
• To create a symbol containing any of the command settings in the table, click
Generate
Barcode
. This will bring up the
Bar Code Dialog
.
• To save the
Differences from Default
report, either as plain text or as a tab-delimited
text file, click
Save As
.
• Click
Send and Save
to send the settings to the imager and save them, or
Send to
Reader
to send the settings without saving them.
Important:
The use the
Differences from Default
feature, you must connect to the
imager and
Receive Reader Settings
via the
Send/Recv
button on the toolbar.
Click this button for a list of
ESP
configuration settings that are
different than default settings.
Click
Generate Barcode
to bring up the
Bar Code
Dialog
. Then create configuration symbols containing
the configuration commands of your choice.
Click
Save As
to save the
report as plain text or a
tab-delimited text file.
Send configuration settings
to the imager without saving
by clicking
Send to Reader
.
Send configuration settings to the
imager and save in ESP by clicking
Send and Save
.