Microscan Quadrus MINI Imager, Руководство пользователя

Страница: 24 / 398

1-12
Quadrus MINI Imager User’s Manual
Test Read Rate
Step 9 — Test Read Rate
Read Rate
indicates the number of successful decodes per second achieved by the
imager.
Test Read Rate by EZ Button
1. To start the Read Rate test, hold
down the EZ Button about three
seconds until you hear
three
short beeps
. The
20%
,
40%
, and
60%
LEDs will illuminate.
While the symbol is being
inspected, the Read Rate LEDs
will indicate the corresponding
read rate percentage on the back
of the unit.
2. To end the Read Rate test, press the EZ Button and quickly release.
Test Read Rate by ESP
1. Click the
Test
button to start the Read Rate test and
Stop
to end it.
If a symbol has been successfully decoded, the symbol’s data and related features will
be presented in the field below the image display window. Also, while the symbol is
being inspected, the Read Rate LEDs will indicate the corresponding Read Rate
percentage on the back of the unit.
2. To end the test, click the
Stop
button.
Note:
Read Rate can also be tested using the
Read Rate
interface in
Utilities
.
Test Read Rate by Serial Command
You can also start a test with the
<C>
or
<Cp>
command and end it with the
<J>
command.
20%, 40%, 60%, 80%, 100%
.
These LEDs represent the
percentage of Good Reads
per images captured.