manualshive.com logo in svg

Microscan Quadrus MINI Imager, Руководство пользователя

Поделиться
Скачать
Microscan Quadrus MINI Imager Скачать руководство пользователя страница 2

ii

Quadrus MINI Imager User’s Manual

Copyright and Disclaimer

Copyright ©201

3

Microscan Systems, Inc.

ISO 9001 Certified

Issued by TüV USA
All rights reserved. The information contained herein is proprietary and is provided solely for the purpose 
of allowing customers to operate and/or service Microscan manufactured equipment and is not to be 
released, reproduced, or used for any other purpose without written permission of Microscan.
Throughout this manual, trademarked names might be used. Rather than place a trademark (™) symbol 
at every occurrence of a trademarked name, we state herein that we are using the names only in an editorial 
fashion, and to the benefit of the trademark owner, with no intention of infringement.

Disclaimer

The information and specifications described in this manual are subject to change without notice.

Latest Manual Version

For the latest version of this manual, see the Download Center on our web site at: 

www.microscan.com

.

Technical Support

For technical support, e-mail: 

[email protected]

.

Warranty

For current warranty information, see

: 

www.microscan.com/warranty

.

Microscan Systems, Inc.

Renton Headquarters

Tel: 425.226.5700 / 800.251.7711
Fax: 425.226.8250

Nashua Office

Tel: 603.598.8400
Fax: 603.577.5818

Microscan Europe

Tel: 011 31 172 423360
Fax: 011 31 172 423366

Microscan Asia Pacific

Tel: 65 6846 1214
Fax: 65 6846 4641

Содержание Quadrus MINI Imager















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды