LVS-9580/9585 Operating Instructions - English
LVS-9580/9585 Operating Instructions - English
Page 21 of 27
Try Re-Grading
When a direct part mark fails to read, position the symbol in a different part of the field of view. The software
is sensitive to motion and may capture a slightly blurred image, which will cause the software not to grade it
correctly. The optional accessory stand, part # 98-9000125-01, can be used to hold the LVS-9580 in a fixed
position.
Keep the “L” pattern square to the field of view.
For most dot peen DPM symbols, the cells are formed by dots and are not connected to each other. This will
prompt the software to enhance the image by “connecting the dots”. However, the operator must keep the L-
pattern square to the field of view in order for the software to grade the symbol correctly.
Correct:
DPM symbol
is square to
the FOV
Incorrect:
DPM
symbol
is not
square to
the FOV
Structure
This system is designed to check the
Data Structure
for compliance to industry standards for MIL-STD-130,
UII, and GS1. The embedded data is listed along with a description of what it stands for and reports the
value used to determine what the embedded data is. The Data Structure Analysis can be printed.