LVS-9580/9585 Operating Instructions - English
LVS-9580/9585 Operating Instructions - English
Page 19 of 27
Grading
The
LVS-9580 Grading Screen
shows 6 boxes on the right side of the viewing window. These will
represent which lighting modes are being used to Grade the DPM code. The LVS-9580 will only use Red
Dome.
There is also a button on this screen titled
Lighting.
This is not authorized for use with the LVS-9580.
Grading a DPM Symbol
On the
Grading Screen
hold the trigger switch in. The target DPM symbol then appears in the viewing
window. A pop-up window appears at the top of the screen which says “Hold trigger while searching”.
Position the DPM symbol so that it is square to the field of view and then hold the LVS-9580 steady.
(Software does not grade the code until there is no motion detected.)
Once software has found the DPM symbol, the screen zooms in (magnify) on the symbol. Software also
reports what grade has been detected. There is a pop-up window at the top of the screen that reports the
best grade found. It will not stop looking for a better grade until either an A Grade has been reached or the
user releases the trigger.