Micros Systems Workstation 5, Руководство по обслуживанию

Страница: 144 / 156

B-2 Workstation 5 Setup Guide
Connector and Cable Diagrams
IO Panel Connectors
IO Panel Connectors
The following connectors are located on the Workstation 5 IO Panel.
IDN Port
The IDN connector is a combination RS422/RS232 port associated with
COM4. This port is functionally equivalent to the RS422-A and RS422-B ports
on the WS4 or WS4 LX. Two configurations are detailed in the following
pages, configured through the POS application.
IDN Port - Driving IDN Printers
One configuration is the RS422 based IDN(+) mode. Figure B-1 shows the
pin-out for this configuration. Use cable P/N 300319-001 to drive IDN
Printers.
Figure B-1: IDN Connector Configured for RD422 IDN
WARNING:
Do not insert a 6-Pin modular plug into the 8-Pin IDN
connector. The 6-Pin plug can push pins 1 and 8 of the
connector out of position. These pins are used by the RS232
Interface. Should you wish to use the RS232 Interface at a later
time, it may not function. Always use an 8-Pin modular plug to
connect an IDN printer to the workstation.